Apiary Visits

Extractors and Honey Houses: What You'll See

A honey house turns full frames into bottled honey through uncapping, spinning, straining and settling, and visiting one shows exactly how clean, sticky and fascinating that work is.

Updated November 19, 2026 · 7 min read · Visiting Farms and Apiaries

In a honey house, you will usually see a series of stations: a place to hold full frames, an uncapping tool that slices off the wax seals, an extractor that spins honey out of the comb, strainers or filters, a settling tank where bubbles and wax rise, and a bottling area with scales, jars and labels. Everything is designed to keep honey clean, dry and moving gently from comb to container. The room smells of warm honey and wax, and surfaces are typically stainless steel, food-grade plastic or sealed concrete for easy cleaning.

A honey house can be a purpose-built building, a converted barn, a clean room in a garage or a licensed kitchen, depending on the size of the operation and local rules, which vary by state. Many visitors are surprised at how simple the core process is, and how much labor it requires. If you are planning a visit during harvest, see farm visits during honey harvest season and how to plan a visit to a local apiary.

Why honey houses exist

Honey is a food product, so extraction and bottling should take place in a clean, enclosed space that keeps out pests, dust and moisture. Honey absorbs water from humid air, which can encourage fermentation if the water content gets too high. Honey houses are therefore built to be dry, sealed and easy to wash. Rules about food handling, cottage food exemptions, inspections and labeling differ by state and by scale, so beekeepers need to check with local authorities. National food labeling information is available from the FDA.

Step 1: bringing in the frames

Honey comes to the honey house in boxes called supers, filled with frames. Beekeepers remove these from the hive, clear off bees using gentle methods and carry them in under cover so bees do not follow them in or rob the honey. Frames are often warmed slightly in a "hot room" or left to sit in a warm space, since warm honey flows more easily. Ripe honey is typically capped with white wax, and the beekeeper checks that most cells are sealed. See how beekeepers decide when to pull honey.

Step 2: uncapping

Before honey can spin out, the wax caps must be removed. You may see:

  • Hot knives, electric or steam-heated, that slice cappings off in a smooth stroke.
  • Uncapping forks or scratchers, which pierce cappings by hand.
  • Mechanical uncappers, machines that shave or flail cappings off in larger operations.
  • An uncapping tank or tub, which catches dripping wax and honey.

The cappings are collected, drained and later melted into beeswax for candles, balm and other products. A good uncapping station is a sticky but orderly sight.

Step 3: the extractor

The extractor is the star. It is a large drum, steel or food-grade plastic, with a spinning basket that holds frames. When spun, centrifugal force flings honey out of the comb against the drum wall, where it runs down to the bottom and out through a gate. The comb stays intact and can be returned to the hive to be refilled, saving the bees a great deal of effort.

You may see:

  • Hand-crank extractors, common on small farms.
  • Electric extractors, which spin frames at controlled speeds.
  • Radial and tangential models, which hold frames in different orientations. Radial extractors hold frames like spokes and spin both sides at once.
  • Large commercial systems, with conveyors and automatic uncappers.

Spinning begins slowly and builds speed to avoid breaking comb. A visitor often hears the hum of the machine, and sees honey streaming down the inside. It is one of the most memorable moments of any honey house visit.

Step 4: straining and settling

Fresh honey contains bits of wax, bee parts and bubbles. It is strained through mesh or filters of various fineness and then held in a settling tank or bucket for a day or more so air bubbles rise and small particles float to the top. You may see:

  • Double sieves, coarse over fine, resting on a bucket.
  • Settling tanks, often with a bottom gate so clear honey can be drawn off.
  • Heated tanks, which some operations use to keep honey flowing or to help with filtering.
  • Pump and filter systems, in larger operations.

How finely and how warmly honey is filtered varies, and affects what is labeled "raw," "strained" or "filtered." For labeling terms, see what raw actually means on a honey label and unfiltered vs. strained local honey. Heavy ultra-filtration removes pollen, which affects traceability, as covered in ultra-filtered honey.

Step 5: bottling and labeling

Clean honey is drawn from the settling tank through a gate into jars or bottles, often set on a scale to fill to the right weight. You might see:

  1. Rows of glass or plastic jars, washed and dried.
  2. A filling station with a spigot and a drip tray.
  3. Lids applied by hand or machine.
  4. A labeling area with printed labels that show the product name, net weight and seller details.
  5. Shelves or cases where finished jars rest before sale.

Labels follow federal and state rules, which vary, so beekeepers are encouraged to consult current guidance. See how to read the fine print on a honey label.

Equipment at a glance

StationTypical equipmentWhat it does
ReceivingSupers, carts, warming areaBrings frames in and keeps honey flowing
UncappingHot knife, fork, tankRemoves wax caps
ExtractionExtractor, gate, hoseSpins honey from comb
FilteringSieves, bucket, tankRemoves wax and bubbles
BottlingSpigot, scale, jarsFills and weighs containers
Wax processingMelter, moldsMakes beeswax products
CleaningHot water, sinks, hosesKeeps everything food safe

Hygiene, safety and manners

A honey house is a food facility, so expect rules. Visitors may be asked to wash hands, wear a hairnet or cover, avoid touching equipment and keep food and drink away. Floors can be sticky and wet. Do not wander, because hot knives, spinning machinery and electrical cords are hazards. Keep children close, and see bee farm visits with young children for more. Honey houses are often closed to the public at certain times to protect food safety, so ask in advance. General manners are in apiary tour etiquette.

A worked example

Nina visits a small farm's honey house on a Saturday in August. She enters a small, sealed building with stainless steel tables, a warm room of stacked supers and a four-frame electric extractor in the corner. The beekeeper hands her a hairnet, shows her the uncapping station and slices wax off a frame with a heated knife. Honey drips into the tub and the smell of warm wax fills the room. The frames go into the extractor, and with a low whir, honey sprays against the drum. After a few minutes, the beekeeper opens the gate and honey runs through a double strainer into a bucket. She explains that this lot will sit for a day before bottling. Next to the sink, Nina sees jars lined up and a scale for filling. The beekeeper hands her a spoonful of honey from the last batch, still warm. In half an hour, she has seen how a frame becomes a jar.

What to ask

A honey house tour is a good time for questions. Try asking:

  • How many pounds of honey do you extract in a season?
  • Do you heat the honey at any stage, and why?
  • How finely do you filter?
  • How long does honey settle before bottling?
  • What do you do with the wax cappings?
  • How do you keep the space clean and pest free?

For more, see questions to ask during a bee farm tour. A honey house also teaches patience, a virtue that honey makers share with anyone who has watched a sticky jar lid at FARM.FM food. For background on honey standards and product information, the National Honey Board and USDA AMS are good sources.

Frequently asked questions

Is honey heated during extraction?

It depends on the beekeeper. Some work in warm rooms or use gentle heat to help honey flow, while others extract at ambient temperature. Ask what temperatures are used, since this affects what the seller means by "raw."

What happens to the wax cappings?

They are drained of honey and usually melted and cleaned to make beeswax, which is used in candles, lip balm, polish and other products. Some beekeepers sell cappings honey or leave them for bees to clean.

Can the public enter a honey house?

Often only on guided tours or open days, and sometimes only through a viewing window. Food safety rules and equipment hazards limit access, so ask before you go.

Do extractors harm the comb?

No. Spinning leaves the comb intact so it can be reused. Careful speed control prevents damage, and bees can quickly refill reused comb, which saves them energy.

Observing a Hive Inspection: What to Watch ForPrevious articleThe Smell of a Working Apiary: What It Tells YouNext article

Keep learning

Food, farming and honey rules, seasons and prices vary by place. Confirm current details with local producers, your state agriculture office and your Extension service.

Browse the state directory for farmers markets, growers, meat and dairy groups, seafood, cottage food rules, beekeepers and Extension contacts near you.

Educational content only. Honey must not be given to infants under 12 months. Follow tested canning methods, never eat wild plants or mushrooms without expert identification, and check state rules on raw milk, meat and cottage foods. This article is not medical, nutrition, legal or food safety advice.