Local Lumber and Woodlot Products
What a managed woodlot can produce, from sawlogs and lumber to firewood, mushrooms and syrup, and how to find, buy and work with local sawyers and foresters.
A woodlot is a small forest managed on a farm or family property, and it is often the quietest source of income on the land. Properly managed, it provides sawlogs for lumber, posts and poles, firewood, maple sap, mushrooms, nuts, wildlife habitat and shade for livestock, all while the trees keep growing. Local lumber, cut by a small sawmill from nearby trees, can be beautiful and affordable and carries a story about the land it came from.
Buying local lumber differs from buying at a big-box store, because boards may be rough sawn, sold by the board foot and dried to different levels. This guide explains what woodlots produce, how local lumber is milled and dried, how to buy and work with it and why forest stewardship matters.
What a woodlot produces
| Product | What it is | Typical buyers | |
|---|---|---|---|
| Sawlogs and lumber | Straight, larger logs sawn into boards and beams | Builders, woodworkers, farms | |
| Posts, poles and fence rails | Durable species cut to length | Farms, landscapers | |
| Firewood | Split and seasoned wood | Households; see [[a:firewood-buying-local-and-seasoned-wood | firewood: buying local and seasoned wood]] |
| Maple sap and syrup | Sap tapped from sugar maples and related trees | Households, markets | |
| Mushrooms and nuts | Forest-grown or foraged crops | Markets, restaurants | |
| Wood chips and mulch | Byproducts of milling and tree work | Gardeners and farms | |
| Specialty wood | Crafts, turning blanks, cutting boards | Makers |
Many woodlots yield several of these in a year. Maple operations, for instance, can combine syrup in late winter with timber work in summer and fall. Our guides to mushroom farms and the maple section of this site show how forests feed local food too, and the North American Maple Syrup Council represents syrup producers.
Local sawmills and how lumber is made
Small portable and stationary sawmills turn logs into boards. The sawyer decides how to cut each log, balancing yield, appearance and grade. Lumber is usually sold by the board foot, a volume equal to a board one foot long, one foot wide and one inch thick. Local mills often sell rough sawn lumber, which has a textured surface and varies slightly in thickness, but can be planed smooth or finished by a nearby shop. Boards may be sold in random widths and lengths, and some mills offer custom sawing for your own logs.
Common local species vary by region. Oak, maple, cherry, walnut, ash, poplar and hickory are common hardwoods in many areas, while pine, spruce, fir, cedar and hemlock supply softwoods. Hardwoods are valued for furniture and flooring, and softwoods for framing, siding and many farm structures. Naturally durable woods such as some cedars and locust are valued for posts and outdoor uses.
Drying and moisture
Lumber straight from the saw is wet and will shrink, twist and crack as it dries. Air drying, in which boards are stacked with spacers in a sheltered, airy spot, takes many months to years depending on thickness and species, and kiln drying uses controlled heat to dry boards faster. Dried wood is more stable and suitable for furniture and interior work. A moisture meter gives a reading of moisture content, and woodworkers often look for levels appropriate to indoor use. Ask the mill whether lumber is green, air dried or kiln dried, and how long it has been drying. Buying green lumber is cheaper, but plan on time and space to dry it properly, or choose uses where movement does not matter, such as rough fence boards or barn siding.
Finding and buying local lumber
Start with a search for local sawmills, woodworking guilds, farm supply stores and your state forestry agency. Many states have lists of sawmills and foresters, and the USDA Forest Service provides information on forestry programs and resources. Ask other builders and farmers who they trust. Visit the mill if possible, and look at the stacks, the sawing quality and the species.
When you buy, ask the following questions:
- What species and grade is this lumber?
- Is it green, air dried or kiln dried?
- What thickness and width are the boards, and are they rough or planed?
- How is it priced, per board foot, per piece or by the load?
- Can you cut to my specifications, and what is the lead time?
- Is the wood treated, and with what?
- Where did the logs come from, and was the harvest done responsibly?
Compare prices carefully, because rough dimensions differ from nominal sizes at a lumber yard. A true two-by-four from a sawmill may be thicker than one at a store, which is often smaller than its name suggests.
Stewardship and forest health
A healthy woodlot is managed over decades. Good practices include selective harvesting, protecting streams and soil, controlling invasive plants, planting seedlings where needed and keeping a diversity of species and ages. Foresters can write a management plan, and many states offer cost-share programs or technical help. The USDA NRCS provides conservation assistance to landowners, and local extension offices have woodland programs. If you own woods, ask a professional forester before cutting, since poor harvesting can damage the stand for generations.
Be careful with insects and diseases. Moving untreated logs and firewood can spread pests; see firewood: buying local and seasoned wood and USDA APHIS. Wildlife benefits from woodlots, and healthy forests also protect water, store carbon and shelter pollinators; see National Wildlife Federation.
Safety if you work with logs and lumber
Felling trees and operating saws are dangerous. Use trained professionals for large trees and near buildings or power lines. If you cut your own wood, wear protective gear and take safety training. Lumber also carries safety needs: wear eye and ear protection, use dust masks around sawdust, and be aware that some woods, such as certain exotics and some native species, can cause allergic reactions. Treated lumber, used for outdoor structures and posts, should not be burned or used for cutting boards or garden beds for food without checking guidance.
Why buy local wood
Buying local lumber keeps money in the community, supports small mills and foresters, reduces transport and gives builders access to unusual sizes and species. It also helps keep forests economically valuable, which discourages conversion to other uses. For farms, a woodlot is one more local resource, as discussed in value-added products for small farms. A sawyer will tell you that the easiest way to start an argument at a lumber yard is to ask how long a board is supposed to be, a quarrel that echoes through FARM.FM ranching.
A worked example
A couple building a small farm stand needs framing, siding and a counter. They contact a nearby sawmill, learn that hemlock and pine are available rough sawn and green, and that oak is available air dried. They order green pine for the frame at a modest price per board foot, hemlock boards for siding, and a few oak slabs for the counter, which they have planed at a local shop. They stack the green boards with spacers under a roof to dry for a few months, and build the frame once the boards have stabilized. The result looks handsome, costs less than imported lumber for the same structure and has a story they tell customers at the stand.
Frequently asked questions
What is a board foot?
A board foot is a measure of lumber volume equal to a board 1 foot long, 1 foot wide and 1 inch thick. Mills often price lumber per board foot.
Is rough sawn lumber good for building?
Yes, for many uses such as framing, barns, fences and rustic siding. For furniture and fine work, it is usually planed after drying.
How long does it take lumber to air dry?
It varies with species, thickness and climate. A common rule of thumb is about a year per inch of thickness for hardwoods, but conditions and uses differ, so use a moisture meter.
How do I find a good forester or sawyer?
Ask your state forestry agency, extension office, woodworking groups and neighbors. Check references, look at past work and ask about insurance and written contracts.