Natural Dyes from Local Plants
Which common plants give usable color to wool and other fibers, how mordants and simmering work, and how to dye safely, responsibly and with realistic expectations.
People have dyed cloth with plants for thousands of years, and the craft remains approachable today. Many kitchens and gardens already hold dye material: onion skins, avocado pits, marigold flowers, black walnut hulls, goldenrod, coreopsis and more. With simple steps, wool, silk and other fibers can take on warm yellows, oranges, browns, soft pinks and, with some plants, blues. Natural dyes tend to be earthy and subtle, and results vary with the plant, water, fiber and method.
This guide explains how plant dyeing works, which plants are commonly used, what mordants are and why they matter, how to dye step by step, and what safety and ethical points to keep in mind. It is a starting point, and local guilds and extension programs can offer further help.
How plant dyeing works
Dye plants contain pigment compounds that can bond with fiber under the right conditions. Protein fibers, such as wool, mohair, alpaca and silk, usually accept natural dyes more readily than plant fibers such as cotton and linen, which often need extra preparation. A mordant is a substance, often a metal salt, that helps the dye bind to the fiber and improves colorfastness. Without a mordant, some dyes wash out or fade quickly, though some plants, such as black walnut, contain tannins that bind on their own.
Colors depend on several factors: the plant part used, its freshness, the amount of dye material relative to fiber, the mordant, water minerals and pH, temperature and time. Because of this, natural dyeing is a craft of experiments. Keep notes, and expect that a color may vary from batch to batch.
Common dye plants
| Plant material | Typical color range on mordanted wool | Notes |
|---|---|---|
| Yellow and brown onion skins | Gold, orange, rusty brown | Easy, kitchen-friendly |
| Marigold flowers | Yellow to gold | Grown in many gardens |
| Goldenrod flowers | Yellow to golden green | Collect only with permission and ethics in mind |
| Black walnut hulls | Brown to deep brown | Strong staining; wear gloves |
| Avocado skins and pits | Soft pinks and tans | Save from the kitchen |
| Coreopsis and cosmos | Orange and golden tones | Garden flowers |
| Madder root | Reds and oranges | Root crop grown by dyers |
| Indigo | Blues | Special vat process, not a simple simmer |
| Red cabbage and berries | Pinks and purples, often fugitive | Fun but may fade quickly |
Some of the most vivid color comes from plants grown specifically for dye, and a few farms and fiber artists cultivate dye gardens. For related fiber work see spinning, dyeing and local fiber arts and local wool, mohair and alpaca fiber.
Safety first
Natural does not always mean harmless. Some plants are toxic, and some dye materials and mordants require careful handling.
- Never use any plant you cannot positively identify. Do not forage unless you know the plant and have permission. See foraging safety and ethics, and if unsure, ask a qualified local expert such as a Master Gardener, as at Master Gardener programs.
- Use dedicated pots, spoons and containers for dyeing, and never use them for food.
- Wear gloves and work in a ventilated area, and wear a dust mask when handling powdered mordants or dyes.
- Some metal mordants, such as copper, iron and especially chrome and tin compounds, can be harmful in the environment and to health. Alum is commonly used by hobbyists and is generally considered milder, but still needs careful handling.
- Keep dyes, mordants and chemicals out of reach of children and pets, and label every container.
- Dispose of used dye baths and mordants according to local guidance. Do not pour metal-containing baths into streams or storm drains; ask your local waste authority or see the EPA.
- If a chemical or plant material is swallowed, contact Poison Control at 1-800-222-1222 through Poison Control.
A basic method
The following describes a general approach for dyeing wool with onion skins. Always follow current instructions for any mordant you use.
- Scour the fiber. Wash wool gently with mild soap to remove oils, then rinse in lukewarm water.
- Mordant, if using. Dissolve the mordant per label directions in a dedicated pot, add wet fiber, heat gently and hold for the time recommended, then cool and rinse. Avoid sudden temperature changes that can felt wool.
- Prepare the dye bath. Simmer plant material in water for some time, then strain it out.
- Add the fiber. Add wet fiber to the dye bath, heat gently to a low simmer, not a boil, and hold, stirring gently, until the color looks right.
- Cool. Let the fiber cool in the bath for deeper color if desired.
- Rinse and dry. Rinse until water runs clear, hang to dry out of direct sun and record what you did.
Weigh your fiber and plant material and record the ratio. A common starting point for strong color is to use about as much plant material as fiber by weight for dried or fresh dye stuffs, but ratios vary and experiments help.
Colorfastness and care
Natural dyes vary in lightfastness, meaning how well they resist fading in light, and washfastness. Some, like walnut and madder, are reasonably durable, while others, such as many flower colors, fade more readily. Wash dyed items gently by hand in cool water with a mild soap, and avoid long exposure to bright sun. Test a small swatch before dyeing a large project. Be honest if you sell naturally dyed goods, and do not promise color that will not fade.
Growing and sourcing dye plants
A small dye garden can include marigold, coreopsis, cosmos, dyer's chamomile, weld, madder and indigo, and many are also loved by pollinators; see Pollinator Partnership and native plant sales and pollinator gardens. Buy seeds or plants from local sources when possible; local seeds and seed libraries can help. Harvest sustainably: take only what you need, leave enough for wildlife and regrowth, and get permission on any land that is not yours. Never harvest from protected areas or from places that may have been sprayed with herbicides.
Fiber artists say the worst part of dyeing is the pot that smells like an onion field for a week, a complaint that would fit well with FARM.FM jokes.
A worked example
A knitter has a bag of yellow onion skins saved from cooking over several months. She weighs four ounces of skins, which she plans to use on four ounces of wool yarn. She scours the yarn, mordants it with alum following package directions in a pot used only for dyeing, then simmers the skins and strains the liquid. She adds the wet yarn and holds it at a gentle simmer for about an hour, lets it cool, rinses and hangs it. The yarn is a warm gold. She notes the amounts and times in a notebook, dyes a second skein with a pinch of iron for a deeper brownish tone, and compares the two once they dry.
Frequently asked questions
Do I need a mordant for natural dyes?
For most plant dyes on wool, yes, to get good color and durability. A few materials with strong tannins, such as black walnut, can work without one.
Can I use food-grade pots for dyeing?
It is best not to. Use pots and tools dedicated to dyeing, especially with mordants, and never use them for food afterward.
Are natural dyes safer than synthetic dyes?
Not automatically. Some plants and mordants are hazardous, and both natural and synthetic dyes need good ventilation and safe handling. Follow instructions and check safety information.
Why did my color fade?
Many natural dyes, especially from flowers and berries, are fugitive, meaning they fade in light or with washing. Using a mordant, choosing durable dye plants and keeping goods out of strong sun helps.